SOFTWARE DATABASE / RELEASE RECORD
VERSION 0.4VAG Bosch MD1CS004 / MD1CP004 Oil Pressure Fix Tool
Offline Windows utility for applying an oil-pressure-control patch to recognized VAG Bosch MD1CS004 and MD1CP004 ECU firmware files.
Categories
Vehicle references
Overview
Oil Pressure Fix 0.4 is a file-based utility for ECU calibration specialists working with selected Bosch MD1CS004 and MD1CP004 firmware used in VAG applications.
It locates patch areas through context-aware pattern scanning instead of fixed addresses. Existing firmware files can be loaded through drag and drop or a file selector, processed with the designated oil-pressure-control patch and reviewed through the operation log.
Compatibility depends on the exact software identifier and binary layout. A complete supported-version list is not available; ECU-family membership alone does not confirm support.
This is an offline file editor, not an OBD diagnostic or read/write interface. A separate compatible ECU programmer is required. Retain the untouched original and validate the output and required checksums before programming.
The patch does not repair mechanical oil-pressure faults and must not conceal a genuine low-oil-pressure condition.
Technical Compatibility
Supported Modules
Operating Systems
ECU Families
System Requirements
- Windows PC; supported versions and architecture are not specified
- Supported Bosch MD1CS004 or MD1CP004 ECU firmware dump
- Compatible ECU programmer for reading and writing firmware
Screenshots
Related Software
Windows BIN analysis and DTC editing utility for supported Bosch, Delphi, Continental, Siemens, Visteon and other ECU strategies.
Legacy Windows ECU service software for supported VAG EDC15/ME7, PSA EDC15C2 and Opel Delco controllers, with profile-dependent PIN, identity and EEPROM functions through a matching interface.
Offline Windows reference tool for Bosch ECU part numbers, controller families and OE cross-references, with exact, wildcard, prefix and binary-dump identifier searches.
Windows map and axis detection for supported Siemens PPD/SID full BDM binaries, with table and 3D views, DTC analysis and XDF/A2L definition export.
Offline Windows checksum inspection and correction for recognized Bosch and Sagem petrol ECU binaries, with eight supplied modules and All, Bad and Fixed counters.
Offline Windows command-line decoder and editor for supported Bosch ME7.5 ECU and VAG instrument-cluster EEPROM files, primarily 1.8T Immobilizer III.